Trang nào cho download Driver của Laptop hả các bác?

1. Install Intel Intel 945GM chipset drivers v 8.1.1.1010

http://support.intel.com/support/chi.../CS-022034.htm

2. Install Intel 945GM video drivers v 14.25.50

http://downloadfinder.intel.com/scri...ProductID=2301

3. Download page for C300 XP drivers

http://h10025.www1.hp.com/ewfrf/wc/s...en&product=321 3867&lang=en

4. Install Intel SATA AHCI Controller Driver v 5.5.0.1035 A SP32478

http://h10025.www1.hp.com/ewfrf/wc/s...&os=228&lang=e n

(follow Manual installation instuctions at the bottom)

5. Install Intel Matrix Storage Manager v 5.5.0.1035 A SP32492

http://h10025.www1.hp.com/ewfrf/wc/s...&os=228&lang=e n

(follow Manual installation instuctions at the bottom)

6. Install Microsoft AUU Drivers SP32646

ftp://ftp.hp.com/pub/softpaq/sp32501-33000/sp32646.exe

7. Install Conexant High Definition Audio Driver v 3.23.0.0 A SP33443

http://h10025.www1.hp.com/ewfrf/wc/s...&os=228&lang=e n

(Automatic installation failed for me)
(follow Manual installation instructions steps I5, selecting the correct Audio device in folder ..\SWSetup\SP33443)

8. Install Conexant HDAUDIO Soft Data Fax Modem with SmartCP v 7.33.00.51 B SP33442

http://h10025.www1.hp.com/ewfrf/wc/s...&os=228&lang=e n

(Automatic installation failed for me)
(follow Manual installation instructions steps I5, selecting the correct Modem device in folder ..\SWSetup\SP33442)

9. Install Broadcom Wireless LAN Driver v 6.10 A SP34152

http://h10025.www1.hp.com/ewfrf/wc/s...&os=228&lang=e n

10. Install Synaptics Touchpad driver v 8.3.8 M SP33751

http://h10025.www1.hp.com/ewfrf/wc/s...&os=228&lang=e n

11. Install System Default Settings v 4.20 W SP33321

http://h10025.www1.hp.com/ewfrf/wc/s...&os=228&lang=e n

12. Install HP Quick Launch Buttons driver v 6.10 B SP33258

http://h10025.www1.hp.com/ewfrf/wc/s...&os=228&lang=e n


Steps to manually install Intel SATA AHCI Controller Driver to support SATA Native Mode

I1. a. Boot up the machine and Enter F10 Setup
b. Goto System Configuration -> Device Configurations -> SATA Native Mode Set to Disable
c. Save settings and exit F10 Setup
I2. a. Install Windows XP Service Pack 2
b. When XP installation is complete, install drivers listed above.


I3. Install Intel SATA AHCI Controller Driver v 5.5.0.1035 A SP32478

http://h10025.www1.hp.com/ewfrf/wc/s...&os=228&lang=e n

I4. In Device Manager, right-click the IDE ATA/ATAPI controllers/Intel 82801 GBM/GHM (ICH7-M Family) ************ ATA Storage Controller and select "Update Driver"

I5. Follow these steps to complete the Hardware Update Wizard:
a. At the first dialog, select "No, not this time" when prompted to connect to Windows Update.
b. At the next dialog, select "Install from a list or specific location (Advanced)".
c. At the next dialog, select "Don't search. I will choose the driver to install".
d. When prompted to select the device driver you want to install for this hardware, do not choose anything but click the "Have Disk..."-button.

e. Select Browse and navigate to the installation folder from step #I4 and click OK.

This folder will be similar to ..\SWSetup\SP3***x. You need to point to the folder for the device you are installing.

f. When prompted to select the device driver you want to install for this hardware, select the Intel 82801GBM SATA AHCI Controller
g. A warning that Windows cannot verify that the device is compatible with your hardware will appear.
When asked if you want to continue installing the driver, select Yes.
h. The installation will complete.

I6. a. Shutdown Windows, restart the machine and Enter F10 Setup.
b. Goto System Configuration -> Device Configurations -> SATA Native Mode Set to Enable
c. Save settings and exit F10 Setup

I7. After Windows restarts, the additional SATA components will be updated.
A System Settings Change will appear.
When asked "Do you want to restart your computer now?" click Yes.
I8. When Windows restarts, the SATA AHCI drivers will be completely installed.